OpenBSD 4.0 (SCRAMJET) #0: Mon Nov 13 00:24:46 CET 2006 root@scramjet.macstuff.local:/usr/src/sys/arch/amd64/compile/SCRAMJET real mem = 536211456 (523644K) avail mem = 446885888 (436412K) using 13142 buffers containing 53829632 bytes (52568K) of memory mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf04b0 (60 entries) bios0: ASUSTek Computer Inc. SK8N cpu0 at mainbus0: (uniprocessor) cpu0: AMD Opteron(tm) Processor 146, 2000.25 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 PCI Host" rev 0xa4 pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 ISA" rev 0xf6 nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 SMBus" rev 0xa4 iic0 at nviic0 iic1 at nviic0 ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 USB" rev 0xa5: irq 7, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 USB" rev 0xa5: irq 5, version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 USB" rev 0xa2: irq 10 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa5: irq 10, address 01:23:45:67:89:ab rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1 pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 IDE" rev 0xa5: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) ppb0 at pci0 dev 10 function 0 "NVIDIA nForce3 PCI-PCI" rev 0xa2 pci1 at ppb0 bus 1 vga1 at pci1 dev 3 function 0 "S3 ViRGE" rev 0x06 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ahc0 at pci1 dev 4 function 0 "Adaptec AHA-2940U" rev 0x00: irq 11 scsibus0 at ahc0: 8 targets sd0 at scsibus0 targ 2 lun 0: SCSI2 0/direct fixed sd0: 8637MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sec, 17689267 sec total em0 at pci1 dev 7 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq 11, address 00:0e:0c:ba:e4:83 pciide1 at pci1 dev 8 function 0 "Promise PDC20378" rev 0x02: DMA wd0 at pciide1 channel 0 drive 0: wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd0(pciide1:0:0): using BIOS timings, Ultra-DMA mode 6 wd1 at pciide1 channel 1 drive 0: wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd1(pciide1:1:0): using BIOS timings, Ultra-DMA mode 6 pciide1: using irq 5 for native-PCI interrupt "TI TSB43AB22 FireWire" rev 0x00 at pci1 dev 9 function 0 not configured ppb1 at pci0 dev 11 function 0 "NVIDIA nForce3 PCI-PCI" rev 0xa4 pci2 at ppb1 bus 2 pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 it2 at isa0 port 0xd00/8: IT87 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated ahc0: target 2 synchronous at 20.0MHz, offset = 0xf dkcsum: sd0 matches BIOS drive 0x80 dkcsum: wd0 matches BIOS drive 0x81 dkcsum: wd1 matches BIOS drive 0x82 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 clock: unknown CMOS layout raid1: Component /dev/wd0d being configured at row: 0 col: 0 Row: 0 Column: 0 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 1 Mod Counter: 118 Clean: Yes Status: 0 raid1: Component /dev/wd1d being configured at row: 0 col: 1 Row: 0 Column: 1 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 1 Mod Counter: 118 Clean: Yes Status: 0 raid1 (root)em0: watchdog timeout -- resetting umass0 at uhub2 port 4 configuration 1 interface 0 umass0: Cypress Semiconductor Cypress AT2LP, rev 2.00/2.40, addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd1 at scsibus1 targ 1 lun 0: SCSI0 0/direct fixed sd1: 190782MB, 190782 cyl, 64 head, 32 sec, 512 bytes/sec, 390721968 sec total umass1 at uhub2 port 3 configuration 1 interface 0 umass1: THD USB2.0, rev 2.00/0.01, addr 3 umass1: using SCSI over Bulk-Only scsibus2 at umass1: 2 targets sd2 at scsibus2 targ 1 lun 0: SCSI0 0/direct fixed sd2: 190782MB, 190782 cyl, 64 head, 32 sec, 512 bytes/sec, 390721968 sec total